Tutco SureHeat Hot Air Heater Serpentine II
Tutco SureHeat Hot Air Heater Serpentine II
These Tutco SureHeat hot air heaters offer a triple pass exchanger housing that allows the heater to run more efficiently and provides an added bonus of safety. The safer design is a result of the incoming air being used to cool the outer shell of the housing. This occurs as the air travels the outside length of the heater element before entering the internal chamber containing the ceramic insulation and serpentine coil elements. Serpentine II air heaters are available up to 3600 watts.
Product successfully added to your cart. View Cart
-
←→
029485 TUTCO SUREHEAT Hot Air Heater Serpentine II Type K Thermocouple and Holder
The 029485 (F029485) is a thermocouple holder for the TUTCO SUREHEAT Serpentine II hot air heaters.029485 TUTCO SUREHEAT Hot Air Heater Serpentine II Type K Thermocouple and Holder
Successfully Added to your Shopping CartAdding to Cart... -
029763 TUTCO SUREHEAT Hot Air Heater Serpentine II Housing Assembly
TUTCO SUREHEAT Hot Air Heater Serpentine II housing assembly for TUTCO SUREHEAT hot air heater elements 029765, 029766, 029767, and 060418.029763 TUTCO SUREHEAT Hot Air Heater Serpentine II Housing Assembly
Successfully Added to your Shopping CartAdding to Cart... -
←→
029765 TUTCO SUREHEAT Hot Air Heater Serpentine II --2,000 Watts
The 029765 TUTCO SUREHEAT air heater provides a maximum process heat of 1400 degrees F with 2,000 watts at 240 volt power and a maximum of 8 amps. This TUTCO SUREHEAT heater has an overall length of 8.20" long with a 0.63" outside diameter.029765 TUTCO SUREHEAT Hot Air Heater Serpentine II --2,000 Watts
Successfully Added to your Shopping CartAdding to Cart... -
029766 TUTCO SUREHEAT Hot Air Heater Serpentine II --2,800 watts
This 029766 Serpentine II hot air heater provides a maximum process heat of 1400 degrees F by providing 2,800 watts at 240 volt power and 12 max. amps. The heater is 8.20" long with a 0.63" outside diameter.029766 TUTCO SUREHEAT Hot Air Heater Serpentine II --2,800 watts
Successfully Added to your Shopping CartAdding to Cart... -
029767 TUTCO SUREHEAT Hot Air Heater Serpentine II -- 3,600 watts
This 029767 TUTCO SUREHEAT hot air heater provides a maximum process heat of 1400 degrees F by providing 3,600 watts at 240 volt power and 15 max. amps. The heater is 8.20" long with a 0.63" outside diameter.029767 TUTCO SUREHEAT Hot Air Heater Serpentine II -- 3,600 watts
Successfully Added to your Shopping CartAdding to Cart... -
039272 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
F039272 TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.039272 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
039272-90 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
039272-90 TUTCO SUREHEAT air heater 90 degree probe Type k thermocouple with an exposed tip for faster reaction time. The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.039272-90 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
039739 TUTCO SUREHEAT Hot Air Heater Serpentine II Base Adaptor Assembly
039739 TUTCO SUREHEAT Hot air heater Serpentine II base adaptor assembly works with Serpentine II TUTCO SUREHEAT heater elements. The TUTCO SUREHEAT heater part numbers are 029765, 029766, 029767, & 060418.039739 TUTCO SUREHEAT Hot Air Heater Serpentine II Base Adaptor Assembly
Successfully Added to your Shopping CartAdding to Cart... -
048917 TUTCO SUREHEAT Hot Air Heater Serpentine II --3,600 Watts
048917 TUTCO SUREHEAT Hot Air Tool Heater Is Serpentine II Heater With A Ceramic Tube. The Hot Air Heater Is 8.20" Long With A 0.63" Outside Diameter. The Heater Provides 3600 Watts Of Heat Using 240 Volt Single Phase Power. These heater elements are shipped in a box containing 2 pieces. ALL ORDERS MUST BE IN MULTIPLES OF 2.048917 TUTCO SUREHEAT Hot Air Heater Serpentine II --3,600 Watts
Successfully Added to your Shopping CartAdding to Cart... -
←→
057081 TUTCO SUREHEAT Hot Air Heater Open Loop Manual Power Control
057081 TUTCO SUREHEAT Air Heater Open Loop Manual Power Controls Are Made For 100-277 Volt Power Single Phase And 25 Amps.057081 TUTCO SUREHEAT Hot Air Heater Open Loop Manual Power Control
Successfully Added to your Shopping CartAdding to Cart... -
060418 TUTCO SUREHEAT Hot Air Heater Serpentine II --3,600 Watts (Two Stage)
The 060418 hot air heater provides a maximum process heat of 1500 degrees F by providing two-stage 3,600 watts at 240 volt power and 15 max. amps. This TUTCO SUREHEAT heater is 8.63" long with a 0.63" outside diameter.
The housing for this heater is part number 029763.
060418 TUTCO SUREHEAT Hot Air Heater Serpentine II --3,600 Watts (Two Stage)
Successfully Added to your Shopping CartAdding to Cart... -
←→
066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
Successfully Added to your Shopping CartAdding to Cart... -
070429 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller--obsoleted
070429 Digital temperature control, 1/16 DIN, 4-20mA and used with 066823 closed-loop power control. This temperature controller has been obsoleted by TUTCO SUREHEAT, and the 076361 model will ship in its place. The 076361 is the digital controller used for TUTCO SUREHEAT hot air tools 068462, 068463 and 068464.070429 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller--obsoleted
Successfully Added to your Shopping CartAdding to Cart... -
←→
076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
Successfully Added to your Shopping CartAdding to Cart... -
200489 TUTCO SUREHEAT Hot Air Heater Serpentine II Gasket for 042339 or 057088
The 200489 (or F200489) TUTCO SUREHEAT air heating elements (Serpentine VI) replacement gasket works with Serpentine VI TUTCO SUREHEAT air heaters and fits onto the groove of the F057088 housing or the F042339 base adaptor.- Buy 1 at $25.00
- Buy 2 at $14.00
- Buy 3 at $12.00
- Buy 4 at $10.00
- Buy 5 at $8.00
200489 TUTCO SUREHEAT Hot Air Heater Serpentine II Gasket for 042339 or 057088
Successfully Added to your Shopping CartAdding to Cart... -
204468 TUTCO SUREHEAT Hot Air Heater Serpentine II Gasket for 039739 or 029763
The 204468 (or F204468) TUTCO SUREHEAT air heating elements (Serpentine II) replacement gasket works with Serpentine II TUTCO SUREHEAT air heaters and fits onto the groove of the F029763 housing or the F039739 base adaptor.204468 TUTCO SUREHEAT Hot Air Heater Serpentine II Gasket for 039739 or 029763
Successfully Added to your Shopping CartAdding to Cart... -
←→
206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
206119 (F206119) TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 1/8" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
←→
206119EXT TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Extension
206119-72-Extension (F206119-72-Extension) TUTCO SUREHEAT air heater Type k thermocouple extension only is 72 inches long with split wire ends and a type K 1200F high temp standard two pin plug. Other custom thermocouples available upon request to meet your application needs.206119EXT TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Extension
Successfully Added to your Shopping CartAdding to Cart...
Tutco SureHeat Hot Air Heater Serpentine VI
Product Guides & Information