Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools
038822 TUTCO SUREHEAT Hot Air Threaded Inline Heater --1,600 Watts
- Description
The 038822 (or F038822) TUTCO SUREHEAT threaded in-line heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar). This threaded in-line hot air heater is designed for high pressure air applications needing a 3/8" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 1,600 maximum watts at 170 volt power and 9.4 max. amps. The heater is 10.6" long with a 304 stainless steel housing. The recommended minimum airflow for this heater is 60 SCFH, and the maximum inlet temperature should be no higher than 900 degrees F. Commercially available lead wires are rated for 105C/218F temperatures. This Sylvania threaded in-line heater is RoHS compliant.
A TUTCO SUREHEAT hot air heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.
TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.
Sylvania Threaded Inline Heaters Product Guide
TUTCO SUREHEAT Threaded In-line Heater Operating Instructions
3/8 Inch NPT Performance Curve--Air Flow*Back Pressure*Temperature
THIS IS LIST PRICING- CALL FOR SPECIAL DISCOUNTS OR QUANTITY DISCOUNTS THAT ARE AVAILABLE.
Related Products
-
￩￫
066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
206119 (F206119) TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 1/8" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
077056 TUTCO SUREHEAT Threaded Inline Heater 3/8"NPT Thermocouple Adapter
077056 TUTCO SUREHEAT threaded Inline heater thermocouple adapter to be used with the F038821, F038822, and F206119 thermocouple.077056 TUTCO SUREHEAT Threaded Inline Heater 3/8"NPT Thermocouple Adapter
Successfully Added to your Shopping CartAdding to Cart...
