Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools
038825 TUTCO SUREHEAT Hot Air Threaded Inline Heater --6000 Watts
- Description
The 038825 (or F038825) TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required. This threaded inline hot air heater is designed for high pressure air applications needing a 1.25" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 6000 maximum watts at 220 volt power and 27.3 max. amps. The heater is 11.3" long with a 304 stainless steel housing. The recommended minimum airflow for this heater is 60 SCFH, and the maximum inlet temperature should be no higher than 900 degrees F. This TUTCO SUREHEAT threaded inline heater is NOT RoHS compliant.
A TUTCO SUREHEAT hot air heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.
TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.
THIS IS LIST PRICING - CALL FOR SPECIAL DISCOUNTS OR QUANTITY DISCOUNTS THAT ARE AVAILABLE.
Related Products
-
￩￫
066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
206119 (F206119) TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 1/8" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
077058 TUTCO SUREHEAT Threaded Inline Heater 1-1/4"NPT Thermocouple Adapter
077058 TUTCO SUREHEAT threaded Inline heater thermocouple adapter to be used with the F038825, F038826, F077065, F077028, and F206119 thermocouple.077058 TUTCO SUREHEAT Threaded Inline Heater 1-1/4"NPT Thermocouple Adapter
Successfully Added to your Shopping CartAdding to Cart...
