068462 TUTCO SUREHEAT Hot Air Heater - 1,500 watts
IN STOCK FOR SAME DAY SHIPPING! 068462 (also known as F068462) TUTCO SUREHEA Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 1,500 max. watts, 120 max. volts, and 13 max. amps. Minimum air flow is 30 SCFH. This air heater is 8.88" long with a 0.81" outside diameter. It comes with 3" long power and thermocouple leads attached to it. Heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply. TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.