Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools
068463 TUTCO SUREHEAT Hot Air Heater --2,000 Watts
- Description
IN STOCK FOR SAME DAY SHIPPING! 068463 (also known as F068463) TUTCO SUREHEA Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 2,000 max. watts, 240 max. volts, and 9 max. amps. Minimum air flow is 70 SCFH. This air heater is 8.88" long with a 0.81" outside diameter. It comes with 3' long power and thermocouple leads attached to it.
Heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.
This part may be similar to ARPAC 809088.
TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.
Related Products
-
￩￫
068472 TUTCO SUREHEAT Hot Air Heaters Flare Attachment
The TUTCO SUREHEAT Hot Air Tool Flare Attachment 068472 Can Be Used On TUTCO SUREHEAT Hot Air Tools. Customers Can Also Make Their Own Custom Nose Attachment To Direct The Air From The Hot Air Tool As Needed. The Flare Attachment For TUTCO SUREHEAT Hot Air Heaters Is 2.19" High With A 0.060" By 2.5" Flared Opening. A Clamp Is Also Included For Attaching To The End Of The Air Heater.068472 TUTCO SUREHEAT Hot Air Heaters Flare Attachment
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.066823 TUTCO SUREHEAT Hot Air Heater Closed-Loop Power Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
068462 TUTCO SUREHEAT Hot Air Heater - 1,500 watts
068462 (also known as F068462) TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 1,500 max. watts, 120 max. volts, and 13 max. amps.068462 TUTCO SUREHEAT Hot Air Heater - 1,500 watts
Successfully Added to your Shopping CartAdding to Cart...
