068464 TUTCO SUREHEAT Hot Air Heater --3,500 Watts
IN STOCK FOR SAME DAY SHIPPING!--068464 (also known as F068464) TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 3,500 max. watts, 240 max. volts, and 15 max. amps. Minimum air flow is 90 SCFH. This air heater is 8.88" long with a 0.81" outside diameter. It comes with 3 foot long power and thermocouple leads attached to it. Maximum inlet temperature is 120 degrees F, and the maximum air flow this TUTCO SUREHEAT hot air tool can handle is 60psi.
Hot air tool life can last up to 5000 hours if the manufacturer?s guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.
TUTCO SUREHEAT Hot Air Tools should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.
Login for special pricing