Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools

068539 TUTCO SUREHEAT Serpentine Replacement Element SRE

068539 TUTCO SUREHEAT Serpentine Replacement Element SRE
068539 TUTCO SUREHEAT Serpentine Replacement Element SRE

Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools

068539 TUTCO SUREHEAT Serpentine Replacement Element SRE

Model Number: F068539
The 068539 (or F0685359 TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068539 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7000 watts of heating capacity with 480-volt 3-phase power.

Maximum quantity exceeded
Minimum purchase amount of 5 items is Required
Maximum purchase amount of 0 is Allowed
Minimum purchase amount of 5 items is Required
Manufacturer: Tutco SureHeat
Facebook
X
Email
Pinterest
Google+
LinkedIn
  • Description

The 068539 (or F068539) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068539 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7000 watts of heating capacity with 480-volt 3-phase power.

Compressed air or air from a regenerative blower should be used to supply CLEAN and DRY air to your heater element. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.

TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.