074719 TUTCO SUREHEAT Jet Hot Air Heater 074719--8,000 Watts
The 074719 (F074719) TUTCO SUREHEAT JET heater provides a powerful, compactly designed heater for rapidly warming normal air or inert gases. Depending on your airflow rate, the SureHeat JET heater is capable of reaching temperatures up 1400 degrees F by providing 8,000 watts at 240 volt single phase power and 33.3 max. amps. The heater tube and body is 15.61" long by 4.50" wide with a 3.72" height. The TUTCO SUREHEAT JET air heater also includes two pre-installed type K isolated, ungrounded and exposed junction temperature sensors for monitoring the incoming and outgoing air temperatures. To make wiring the thermocouples to the temperature controller as easy as possible, the heater housing body comes with an integrated terminal block on the back end of the housing. With The TUTCO SUREHEAT JET air heater, the maximum inlet air pressure is 60 PSI (4 bar), and the maximum inlet air temperature is 200 degrees F. The minimum airflow for this TUTCO SUREHEAT heater is 120 SCFH (57 SLPM). The exit air connection on the TUTCO SUREHEAT JET is designed for 1-1/2" NPT, and the inlet air connection is made for 3/4" NPT. This air heater has CE, UL Recognized, and CSA safety approvals. It is recommended that the heater be used in a location with an ambient temperature between 32 and 104 degrees F (0 to 40 degrees C). The environment should be well-ventilated with minimal dust, dirt, and moisture (0 to 95% Relative Humidity).
When a 075526 TUTCO SUREHEAT Jet control panel (Purchased Separately) is used for regulating the heater, the set up with AC power is very convenient and trouble-free. When used correctly per TUTCO SUREHEAT's operating recommendations, the heater life can last up to 5000 hours.
If you want to create your own controlling system, then also order the 076361 temperature controller, the 066823 30 amp power controller, and the 074835 thermal safety switch control.
THIS IS LIST PRICING- CALL FOR SPECIAL DISCOUNTS OR QUANTITY DISCOUNTS THAT ARE AVAILABLE.