Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools

076418 TUTCO SUREHEAT Hot Air Heater 076418 Threaded Inline Version--18,000 Watts

076418 TUTCO SUREHEAT Hot Air Heater 076418 Threaded Inline Version--18,000 Watts
076418 TUTCO SUREHEAT Hot Air Heater 076418 Threaded Inline Version--18,000 Watts

Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools

076418 TUTCO SUREHEAT Hot Air Heater 076418 Threaded Inline Version--18,000 Watts

Model Number: F076418
076418 TUTCO SUREHEAT threaded inline heater is a Style B design that can handle a maximum air pressure of 150 psi (10 bar). This TUTCO SUREHEAT air heater model allows a minimal air leak out through the power wires. This threaded inline hot air heater is designed for high pressure air applications needing a 2.5" NPT sized heater.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
Manufacturer: Tutco SureHeat
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
  • Description

076418 TUTCO SUREHEAT threaded inline heater is a Style B design that can handle a maximum air pressure of 150 psi (10 bar). This TUTCO SUREHEAT air heater model allows a minimal air leak out through the power wires. This threaded inline hot air heater is designed for high pressure air applications needing a 2.5" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 18,000 maximum watts at 480 volt power (Three phase ONLY 21.7 max. amps.)

 

The heater is 12.2" long with a 304 stainless steel housing. The recommended minimum airflow for this heater is 60 SCFH, and the maximum inlet temperature should be no higher than 200 degrees F. This Tutco SureHeat threaded inline heater is RoHS compliant. This air heater has six 21" long power wires (stranded 10awg with fiberglass sleeving) that exit through two #10 Swagelok 1/2" NPT fittings. Commercially available lead wires are rated for 105C/218F temperatures.

 

A TUTCO SUREHEAT inline air heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 psi will need to be filtered to eliminate oil from the air supply.