Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

076754 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 480V 3P 30A 60Hz

076754 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 480V 3P 30A 60Hz
076754 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 480V 3P 30A 60Hz

Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

076754 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 480V 3P 30A 60Hz

Model Number: F076754
F076754 Tutco SureHeat Max and Max HT Control Panel is designed for 480 volt 3 phase power with 30 amps and 60Hz. It can be used for the F074726, F074731, F074734, and F077083 Sureheat Heaters.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
Manufacturer: Tutco SureHeat
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
  • Description

The F076754 or 076754 TUTCO SUREHEAT Max and Max HT Control Panel has been obsoleted and replaced by the F078135/078135 control panel. The 076754 control panel was designed for 480 volt 3 phase power with 30 amps and 60Hz. It can be used for the 074726, 074731, 074734, and 077083 TUTCO SUREHEAT Heaters.

The control panel assembly consists of these features:
*NEMA 12 painted steel, single door, wall mounted enclosure (20"H x 20"W x 10"D)
*3-Pole Circuit Breaker with door-mounted operator handle
*3-Pole Power Contactor with 120 volt holding coil
*Solid State Power Controller--SSR (Solid State Relay)--VDC Pulsed Output
*1/16 DIN Digital PID Temperature Controller with VDC pulsed output for controlling heater exit air temperature (heater exit "S2" type K thermocouple)
+++++++++The temperatuer controller's PID settings are pre-programmed for optimum use with TUTCO SUREHEAT process air heaters+++++++++
*RS485 Communication Compatible Temperature Controller
*ON/OFF Selector Switch, Push Button E-Stop, Push Button Reset
*Power ON, High Limit LED indicator lamps
*Internally mounted high limit temperature control for low airflow/high limit protection by using the heater's inlet "S1" type K thermocouple. Manual reset required via the panel mount push button.
*UL508 Approved