Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

076905 TUTCO SUREHEAT MAX CONTROL PANEL 380/400V 3P 30A 50/60Hz

076905 TUTCO SUREHEAT MAX CONTROL PANEL 380/400V 3P 30A 50/60Hz
076905 TUTCO SUREHEAT MAX CONTROL PANEL 380/400V 3P 30A 50/60Hz

Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

076905 TUTCO SUREHEAT MAX CONTROL PANEL 380/400V 3P 30A 50/60Hz

Model Number: F076905
F076905 or 076905 Tutco Sureheat Max Control Panel is designed for 380/400 volt 3 phase power with 30 amps and 50/60Hz. It can be used for the 074725, 074729, and 077082 TUTCO SUREHEAT Max/Max HT Heaters.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
100 Left in Stock
Manufacturer: Tutco SureHeat
Facebook
X
Email
Pinterest
Google+
LinkedIn
  • Description

The F076905 has been obsoleted and replaced by the F078216. The F078216 has the same design with CE certification.

F076905 or 076905 TUTCO SUREHEAT Max Control Panel is designed for 380/400 volt 3 phase power with 30 amps and 50/60Hz. It can be used for the 074725, 074729, and 077082 TUTCO SUREHEAT Max/Max HT Heaters.

The control panel assembly consists of these features:
*NEMA 12 painted steel, single door, wall mounted enclosure (20"H x 20"W x 10"D)
*3-Pole Circuit Breaker with door-mounted operator handle
*3-Pole Power Contactor with 120 volt holding coil
*Solid State Power Controller--SSR (Solid State Relay)--VDC Pulsed Output
*1/16 DIN Digital PID Temperature Controller with VDC pulsed output for controlling heater exit air temperature (heater exit "S2" type K thermocouple)
+++++++++The temperatuer controller's PID settings are pre-programmed for optimum use with Tutco SureHeat process air heaters+++++++++
*RS485 Communication Compatible Temperature Controller
*ON/OFF Selector Switch, Push Button E-Stop, Push Button Reset
*Power ON, High Limit LED indicator lamps
*Internally mounted high limit temperature control for low airflow/high limit protection by using the heater's inlet "S1" type K thermocouple. Manual reset required via the panel mount push button.
*UL508 Approved