Home / Shop / Product Types / Air Heaters / Hot Air Heaters and Tools
- Description
The 077028 (or F077028) TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar). This threaded inline hot air heater is designed for high pressure air applications needing a 1.25" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 8000 maximum watts at 240 volt Single or Three Phase power and 33.3 (1PH) or 19.2 (3PH) max. amps. The heater is 12.2" long with a 304 stainless steel housing. The recommended minimum airflow for this heater is 60 SCFH, and the maximum inlet temperature should be no higher than 900 degrees F. Commercially available lead wires are rated for 105C/218F temperatures. This TUTCO SUREHEAT threaded inline heater is RoHS compliant.
A Tutco SureHeat inline heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply. TUTCO SUREHEAT Air/Inert Gas heaters should be used to heat air or an inert gas only. Use with explosive gases or in an explosive ambient can result in an explosive event, possibly leading to a serious accident or injury.
Related Products
-
￩￫
076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.076361 TUTCO SUREHEAT Hot Air Heater Digital Temperature Controller
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
206119 (F206119) TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 1/8" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.206119 TUTCO SUREHEAT Hot Air Heater Type K Thermocouple Probe
Successfully Added to your Shopping CartAdding to Cart... -
076753 TUTCO SUREHEAT MAX CONTROL PANEL 240V 3P 30A 60Hz
F076753 Sureheat Max Control Panel is designed for 240 volt 3 phase power with 30 amps and 60Hz. It can be used for the F074724 and F074728 Sureheat Max Heaters.076753 TUTCO SUREHEAT MAX CONTROL PANEL 240V 3P 30A 60Hz
Successfully Added to your Shopping CartAdding to Cart... -
￩￫
077058 TUTCO SUREHEAT Threaded Inline Heater 1-1/4"NPT Thermocouple Adapter
077058 TUTCO SUREHEAT threaded Inline heater thermocouple adapter to be used with the F038825, F038826, F077065, F077028, and F206119 thermocouple.077058 TUTCO SUREHEAT Threaded Inline Heater 1-1/4"NPT Thermocouple Adapter
Successfully Added to your Shopping CartAdding to Cart...
