Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

078136 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 240VAC or 480VAC 3P 60A 50-60Hz

078136 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 240VAC or 480VAC 3P 60A 50-60Hz
078136 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 240VAC or 480VAC 3P 60A 50-60Hz

Home / Shop / Product Types / Air Heaters / Sureheat Max Air Heater & Max Ht Air Heater

078136 TUTCO SUREHEAT MAX/MAX HT CONTROL PANEL 240VAC or 480VAC 3P 60A 50-60Hz

Model Number: F078136
F078136 or 078136 TUTCO SUREHEAT Max and Max HT Control Panel is designed for input voltages of 240VAC or 480 VAC  3 phase power with 60 amps and 50-60Hz.  This control panel replaces the F076755 and F076756 control panels.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
1 Left in Stock
Manufacturer: Tutco SureHeat
Facebook
X
Email
Pinterest
Google+
LinkedIn
  • Description

F078136 or 078136 TUTCO SUREHEAT Max and Max HT Control Panel is designed for input voltages of 240VAC or 480 VAC  3 phase power with 60 amps and 50-60Hz.  This control panel replaces the F076755 and F076756 control panels.

The control panel assembly consists of these features:
*NEMA 12 painted steel, single door, wall-mounted enclosure (24"H x 24"W x 10"D)
*3-Pole Circuit Breaker with door-mounted operator handle
*3-Pole Power Contactor with 120 volt holding coil
*Solid State Power Controller--SSR (Solid State Relay)--VDC Pulsed Output
*1/16 DIN Eurotherm Digital PID Temperature Controller with VDC pulsed output for controlling heater exit air temperature (heater exit "S2" type K thermocouple)
+++++++++The temperature controller's PID settings are pre-programmed for optimum use with TUTCO SUREHEAT process air heaters+++++++++

*Local and Remote Control for LAN Connectivity for critical systems communications
*Ethernet Port located on the panel exterior and works with standard RJ45 terminated Ethernet cabling. For more information and instructions on connecting to a LAN, please visit https://www.eurotherm.com/itools.

*Ethernet Modbus Compatible Eurotherm Temperature Controller
*LED Illuminated ON/OFF Selector Switch, Push Button Emergency Stop, Push Button Reset, and an Over-Temperature Alarm Button
*Internally mounted high limit temperature control for low airflow/high limit protection by using the heater's inlet "S1" type K thermocouple. Manual reset required via the panel mount push button.
*UL508 Approved, RoHS

It can be used for the 063007 (3ph config. only), 074728, 074732, 074736, 077081 and 077085 TUTCO SUREHEAT Heaters.