The TD75060E-14A12-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with right-angle 12 inch stainless steel braiding on 14 inch leads.

The TD75060E-14B12-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 12 inch stainless steel braiding on 14 inch leads.

The TD75060E-14C12-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 12 inch flexible conduit on 14 inch leads.

The TD75060E-14E-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 14 inch fiberglass leads and EXPOXY POTTING.

The TD75060E-14F-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 14 inch fiberglass leads and a standard 1.5 inch flange.

The TD75060E-14H-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Brass NPT fitting and 14 inch fiberglass leads.

The TD75060E-14K12-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 12 inch right-angle flexible conduit on 14 inch leads.

The TD75060E-14Q-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Stainless Steel NPT fitting and 14 inch fiberglass leads.

The TD75060E-14R-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 14 inch right-angle fiberglass leads.

The TD75060E-14S-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 14 inch fiberglass leads.

The TD75060E-26A24-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with right-angle 24 inch stainless steel braiding on 26 inch leads.

The TD75060E-26B24-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 24 inch stainless steel braiding on 26 inch leads.

The TD75060E-26C24-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 24 inch flexible conduit on 26 inch leads.

The TD75060E-26E-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 26 inch fiberglass leads and EXPOXY POTTING.

The TD75060E-26F-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 26 inch fiberglass leads and a standard 1.5 inch flange.

The TD75060E-26H-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Brass NPT fitting and 26 inch fiberglass leads.

The TD75060E-26K24-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 24 inch right-angle flexible conduit on 26 inch leads.

The TD75060E-26Q-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Stainless Steel NPT fitting and 26 inch fiberglass leads.

The TD75060E-26R-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 26 inch right-angle fiberglass leads.

The TD75060E-26S-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 26 inch fiberglass leads.

The TD75060E-38A36-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with right-angle 36 inch stainless steel braiding on 38 inch leads.

The TD75060E-38B36-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 36 inch stainless steel braiding on 38 inch leads.

The TD75060E-38C36-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 36 inch flexible conduit on 38 inch leads.

The TD75060E-38E-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 38 inch fiberglass leads and EXPOXY POTTING.

The TD75060E-38F-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 38 inch fiberglass leads and a standard 1.5 inch flange.

The TD75060E-38H-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Brass NPT fitting and 38 inch fiberglass leads.

The TD75060E-38K36-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 36 inch right-angle flexible conduit on 38 inch leads.

The TD75060E-38Q-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with Stainless Steel NPT fitting and 38 inch fiberglass leads.

The TD75060E-38R-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 38 inch right-angle fiberglass leads.

The TD75060E-38S-120 cartridge heater is 0.75" in diameter, with an insertion length of 6 inches and an overall length (OAL) of 6 inches. The cartridge heater is designed for 120 volts and 375 watts with 38 inch fiberglass leads.