The TD75030C-14A12 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with right-angle 12 inch stainless steel braiding on 14 inch leads.

The TD75030C-14B12 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 12 inch stainless steel braiding on 14 inch leads.

The TD75030C-14C12 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 12 inch flexible conduit on 14 inch leads.

The TD75030C-14E cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 14 inch fiberglass leads and EXPOXY POTTING.

The TD75030C-14F cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 14 inch fiberglass leads and a standard 1.5 inch flange.

The TD75030C-14H cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with Brass NPT fitting and 14 inch fiberglass leads.

The TD75030C-14K12 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 12 inch right-angle flexible conduit on 14 inch leads.

The TD75030C-14Q cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with Stainless Steel NPT fitting and 14 inch fiberglass leads.

The TD75030C-14R cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 14 inch right-angle fiberglass leads.

The TD75030C-14S cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 14 inch fiberglass leads.

The TD75030C-26A24 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with right-angle 24 inch stainless steel braiding on 26 inch leads.

The TD75030C-26B24 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 24 inch stainless steel braiding on 26 inch leads.

The TD75030C-26C24 cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 24 inch flexible conduit on 26 inch leads.

The TD75030C-26E cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 26 inch fiberglass leads and EXPOXY POTTING.

The TD75030C-26F cartridge heater is 0.75" in diameter, with an insertion length of 3 inches and an overall length (OAL) of 3 inches. The cartridge heater is designed for 120 volts and 500 watts with 26 inch fiberglass leads and a standard 1.5 inch flange.