The 068535 (or F068535) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068535 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7000 watts of heating capacity with 240-volt 3-phase power.

The 068544 (or F068544) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068544 replacement heating element is 3.50" in diameter with a 304 stainless steel housing, and it is made to supply 12,000 watts of heating capacity with 240-volt 3-phase power.

The 068577 (or F068577) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068577 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 6000 watts of heating capacity with 380-volt 3-phase power.

The 068578 (or F068578) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068578 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7500 watts of heating capacity with 380-volt 3-phase power.

The 068581 (or F068581) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068581 replacement heating element is 3.50" in diameter with a 304 stainless steel housing, and it is made to supply 10,000 watts of heating capacity with 380-volt 3-phase power.

074718 TUTCO SUREHEAT JET heater provides a powerful, compactly designed heater for rapidly warming normal air or inert gases. Depending on your airflow rate, the Tutco SureHeat JET heater is capable of reaching temperatures up 1400 degrees F by providing 3,000 watts at 240 volt single phase power and 12.5 max. amps. The heater tube and body is 15.61" long by 4.50" wide with a 3.72" height.

The 074829 (also know as F074829) is a 1/16 DIN digital temperature controller for the S2 type K thermocouple for the Tutco SureHeat Jet heaters 074718 and 074719. This controller goes with the 074835 inlet temperature limit (relay output) circuit for the S1 type K thermocouple also for the Tutco SureHeat Jet heaters.

The 074835 (also know as F074835) is an inlet temperature limi circuit for S1 type K thermocouple for the SureHeat Jet heaters 074718 and 074719. This relay goes with the 074829 exit temperature controller for the S2 type K thermocouple also for the SureHeat Jet heaters.

The F075526 or 075526 TUTCO SUREHEAT Max and Max HT Control Panel has been obsoleted and replaced by the F078420 control panel. Please check out the features of the F078420 control panel.

This 075616 TUTCO SUREHEAT air heater is a complete heater with a self contained blower and digital display (closed loop PID) temperature controller.

This 075835 (or F075835) TUTCO SUREHEAT Air Heater Comes With An Integrated Digital Display (Closed Loop Pid) Temperature Controller. This Skorpion Heater Is Ready To Be Hooked Up To An External Air Source And Plugged Into An Electrical Outlet.

This 076008 TUTCO SUREHEAT Air Heater Is A Complete Heater With A Self Contained Blower And Digital Display (Closed Loop Pid)temperature Controller. This Skorpion Heater Is Ready To Be Plugged Into An Electrical Outlet And Used For Your Heating Application. Feel Confident Purchasing This TUTCO SUREHEAT Heater Knowing It Comes With An Outstanding Three Year Warranty.

This 076029 (OR F076029) TUTCO SUREHEAT Air Heater Comes With An Integrated Digital Display Temperature Controller. This Skorpion Heater Is Ready To Be Hooked Up To An Air Supply And Plugged Into An Electrical Outlet.

This 076436 Tutco SureHeat Skorpion Air Heater Is A Complete Heater With A Self Contained Larger 4500 Watt Blower (22 To 45 Scfm Maximum Flow Rate With 60hz Pwer Supply) And Digital Display (Closed Loop Pid)temperature Controller. This Model Is Ideal For International Applications That Run With 50 Hz Power,

078420 (F078420) TUTCO SUREHEAT control panel is a closed-loop temperature control system. Connecting this TUTCO SUREHEAT control panel with a TUTCO SUREHEAT Jet, Threaded In-line, or Hot Air Tool heater helps to ensure safety, the proper power, and perfect control.

It comes with a NEMA 12 PAINTED STEEL enclosure (16-inch width x 20-inch height x 6-inch depth) and a 40A (8 Kilowatt maximum for 240-volt heaters) 120V-240V 1PH electrical rating. It comes factory pre-programmed for optimum TUTCO SUREHEAT Jet heater life. The control system includes: Eurotherm Temp Controller, and an Ethernet communication port along with a thermal safety switch. The 078420 model is also UL 508A, RoHS, & CE compliant.