These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.


The 010226 (also known as F010226) TUTCO SUREHEAT SERIES I AIR HEATER ELEMENT is made for 1050 watts of power, a maximum voltage of 180, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 014372 (also known as 014372) TUTCO SUREHEAT SERIES I AIR HEATER ELEMENT is made for 1000 watts of power, a maximum voltage of 130, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 014682 (also known as F014682) TUTCO SUREHEAT SERIES I AIR HEATER ELEMENT is made for 680 watts of power, a maximum voltage of 145, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 014683 (also known as F014683) TUTCO SUREHEAT SERIES I AIR HEATER ELEMENT is made for 650 watts of power, a maximum voltage of 105, and a maximum controllable air temperature of 1600 deg F.

The 015509 TUTCO SUREHEAT Series I Hot Air Heater Element Stainless Steel Outer Shield--open Ended.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 016501 (also known as F016501) TUTCO SUREHEAT SERIES II AIR HEATER ELEMENT is made for 1125 watts of power, a maximum voltage of 130, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 016502 (also known as F016502) TUTCO SUREHEAT SERIES II AIR HEATER ELEMENT is made for 600 watts of power, a maximum voltage of 95, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 016503 (also known as F016503) TUTCO SUREHEAT SERIES II AIR HEATER ELEMENT is made for 850 watts of power, a maximum voltage of 80, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 016504 (also known as F016504) TUTCO SUREHEAT SERIES II AIR HEATER ELEMENT is made for 650 watts of power, a maximum voltage of 70, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 017558 (also known as F017558) TUTCO SUREHEAT SERIES III AIR HEATER ELEMENT is made for 2050 watts of power, a maximum voltage of 160, and a maximum controllable air temperature of 1600 deg F.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 017575 (F017575) TUTCO SUREHEAT SERIES III AIR HEATER ELEMENT is made for 1450 watts of power, a maximum voltage of 135, and a maximum controllable air temperature of 1600 deg F.

017853 (F017853) TUTCO SUREHEAT Hot Air Heater Series II Stainless Steel Outer Shield--open Ended Accessory.

The 029485 (F029485) is a thermocouple holder for the TUTCO SUREHEAT Serpentine II hot air heaters.

TUTCO SUREHEAT Hot Air Heater Serpentine II housing assembly for TUTCO SUREHEAT hot air heater elements 029765, 029766, 029767, and 060418.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 029765 (also known as F029765) TUTCO SUREHEAT Hot Air heater provides triple pass heat exchange within the heater housing. The Serpentine II heater's triple pass exchange housing uses the incoming air supply to cool the outside shell of the TUTCO SUREHEAT heater. This TUTCO SUREHEAT air heater provides a maximum process heat of 1400 degrees F with 2,000 watts at 240 volt power and a maximum of 8 amps. This TUTCO SUREHEAT heater has an overall length of 8.20" long with a 0.63" outside diameter.The housing for this TUTCO SUREHEAT heater is part number 029763.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 029766 TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing. The Serpentine II heater's triple pass exchange housing uses incoming air to cool the outside shell of the heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 2,800 watts at 240 volt power and 12 max. amps. The heater is 8.20" long with a 0.63" outside diameter.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

Always in stock for same day shipping, the 029767 (or F029767) TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing. The Serpentine II heater's triple pass exchange housing uses incoming air to cool the outside shell of the heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 3,600 watts at 240 volt power and 15 max. amps. The heater is 8.20" long with a 0.63" outside diameter.

Heater life can last up to 5000 hours if the manufacturer's guidelines are followed. Compressed air or air from a regenerative blower can be used to supply CLEAN and DRY air to your heater. Dirt, grease, oil, oil vapors, corrosive gases, and reactive gases will damage the air heater. Compressed air at typically 100 p.s.i. will need to be filtered to eliminate oil from the air supply.

038821 TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required.

The 038822 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

038823 TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required.

The 038824 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

038825 TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required. This threaded inline hot air heater is designed for high pressure air applications needing a 1.25" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 6000 maximum watts at 220 volt power and 27.3 max. amps.

The 038826 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

F039272 TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

039272-90 TUTCO SUREHEAT air heater 90 degree probe Type k thermocouple with an exposed tip for faster reaction time. The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

039739 TUTCO SUREHEAT Hot air heater Serpentine II base adaptor assembly works with Serpentine II TUTCO SUREHEAT heater elements. The TUTCO SUREHEAT heater part numbers are 029765, 029766, 029767, & 060418.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 040291 (also known as F040291) TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

Always in stock for same day shipping, the 040292 (or F040292) TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing. The Serpentine VI heater's triple pass exchange housing uses incoming air to travel (AND COOL) down the outside shell of the heater. The air then travels through a slot and into air holes, where it rapidly warms as it flows over the heater element and exits out of the heater. This hot air heater provides a maximum process heat of 1500 degrees F by providing 6,000 watts at 240 volt power and 25 max. amps. The heater is 10.88" long with a 1.25" outside diameter.

The housing for this heater is part number 057088.

The 040299 is a thermocouple holder for the TUTCO SUREHEAT Serpentine VI hot air heaters, and it includes one type K thermocouple with an exposed tip.

042339 TUTCO SUREHEAT Hot Air Heater Serpentine VI Base Adaptor Assembly Works With Serpentine VI TUTCO SUREHEAT Heater Elements. The TUTCO SUREHEAT Heater Part Numbers Are 040291, 040292, 061429, & 056548.