Chromalox GSU-152-120-CT similar Urn Heater Immersion Heater The GSU-152-120-CT similar urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
$553.00

Home / Shop / Product Types / Immersion Heaters / Urn Heaters

GSU-152-120-CT similar Urn Heater Immersion Heater

$553.00
GSU-152-120-CT similar Urn Heater Immersion Heater
GSU-152-120-CT similar Urn Heater Immersion Heater

Home / Shop / Product Types / Immersion Heaters / Urn Heaters

GSU-152-120-CT similar Urn Heater Immersion Heater

$553.00
Model Number: JOBCO186079-TTUH-CO-15
The GSU-152-120-CT similar urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
553.000
Manufacturer: Chromalox
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
  • Description

The GSU-152-120-CT similar urn heater is an immersion heater built with a lower watt density to provide a long heater life and dependable performance. Urn heaters can be designed for use in commercial coffee makers, percolators, restaurant buffet tables, sterilizers, autoclaves, steam tables, kettles, and humidifiers. These immersion heaters are ideal for other applications that require a low profile and short tubular element lengths.

The GSU-152-120-CT urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the ?A? overall heater length dimension is 7.5 inches, the ?B? inside tank height is 1.375 inch, and the ?C? width dimension is 3 inches. This heater comes with two stainless steel sheath tubular elements that are silver brazed into a brass header. This heater is also supplied with a standard 4 inch octagon conduit box.

An optional thermal cut-off is supplied with this immersion heater. This protective mechanism will shut the power off to the heater whenever a low liquid level is detected.

PLEASE NOTE!!!! There is up to a 4 week lead time for this heater, if it is not in stock at the time of the order.