Other GSU-202-120-CT Urn Heater Immersion Heater The GSU-202-120-CT urn heater is made for applications requiring 120 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
$440.00

Home / Shop / Heater Types / Immersion Heaters / Urn Heaters

GSU-202-120-CT Urn Heater Immersion Heater

$440.00
GSU-202-120-CT Urn Heater Immersion Heater
GSU-202-120-CT Urn Heater Immersion Heater

Home / Shop / Heater Types / Immersion Heaters / Urn Heaters

GSU-202-120-CT Urn Heater Immersion Heater

$440.00
Model Number: GSU202120CT
The GSU-202-120-CT urn heater is made for applications requiring 120 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
440.000
Manufacturer: Other
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
  • Description

The GSU-202-120-CT urn heater has been obsoleted. The replacement urn heater is only 1500 watts 120 volts and 12.5amps. The overall heater length dimension is 7-7/16 inches, the  inside tank height is 2-1/8 inches, and the width dimension is 3-1/16 inches. This heater comes with two copper sheath tubular elements that are silver brazed into a brass header. This heater is also supplied with a standard 4 inch square conduit box. The obsoleted Marathon/Glenn Electric immersion heater part number is GSU-202-120-CO OR 10-6411-39. An optional thermal cut-off is supplied with this immersion heater. This protective mechanism will shut the power off to the heater whenever a low liquid level is detected.