The 040299 is a thermocouple holder for the TUTCO SUREHEAT Serpentine VI hot air heaters, and it includes one type K thermocouple with an exposed tip.

042339 TUTCO SUREHEAT Hot Air Heater Serpentine VI Base Adaptor Assembly Works With Serpentine VI TUTCO SUREHEAT Heater Elements. The TUTCO SUREHEAT Heater Part Numbers Are 040291, 040292, 061429, & 056548.

048917 TUTCO SUREHEAT Hot Air Tool Heater Is Serpentine II Heater With A Ceramic Tube. The Hot Air Heater Is 8.20" Long With A 0.63" Outside Diameter. The Heater Provides 3600 Watts Of Heat Using 240 Volt Single Phase Power. These heater elements are shipped in a box containing 2 pieces. ALL ORDERS MUST BE IN MULTIPLES OF 2.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

Always in stock for same day shipping, the 056548 (ALSO KNOWN AS F056548) TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing. The Serpentine VI heater's triple pass exchange housing uses incoming air to travel (AND COOL) down the outside shell of the heater. The air then travels through a slot and into air holes, where it rapidly warms as it flows over the heater element and exits out of the heater. This hot air heater provides a maximum process heat of 1500 degrees F by providing 8,000 watts at 240 volt power and 33.3 max. amps. The heater is 10.88" long with a 1.25" outside diameter.

The housing for this heater is part number 057088.

057081 TUTCO SUREHEAT Air Heater Open Loop Manual Power Controls Are Made For 100-277 Volt Power Single Phase And 25 Amps.

057083 TUTCO SUREHEAT Hot Air Heater Series I Stainless Steel Outer Shield--open Ended.

The TUTCO SUREHEAT Serpentine VI Hot Air Heater Triple Pass Exchange Housing 057088 (or F057088) is used for the Serpentine VI Hot Air Tools. It is 2.1" in diameter with a 12.9" overall body length. The outside diameter of the air outlet is 1.4", and it has a 3/4" NPT on the air inlet opening. This housing is used for these TUTCO SUREHEAT heater elements: 040291, 040292, 061429, 056548, 076634, and 076635. Similar to 003-10027 that is the housing for the 003-10031, 003-10032, 003-10072, and 003-10140 OEM heater elements.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 060418 (or F060418) TUTCO SUREHEAT Hot Air two stage heater element with a glass lining provides a triple pass exchange housing and faster heat up times. The Serpentine II heater's triple pass exchange housing uses incoming air to travel (AND COOL) down the outside shell of the TUTCO SUREHEAT heater. The air then travels through a slot and into air holes, where it rapidly warms as it flows over the heater element and exits out of the Sylvania air heater. This hot air heater provides a maximum process heat of 1500 degrees F by providing two-stage 3,600 watts at 240 volt power and 15 max. amps. This TUTCO SUREHEAT heater is 8.63" long with a 0.63" outside diameter.

These heater elements are shipped in a box containing 2 pieces. Heater elements must be ordered in multiples of 2 pieces! Price is the cost for one heater element.

The 061429 (also known as F061429) TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing. The Serpentine VI heater's triple pass exchange housing uses incoming air to travel (AND COOL) down the outside shell of the TUTCO SUREHEAT heater. The air then travels through a slot and into air holes, where it rapidly warms as it flows over the heater element and exits out of the TUTCO SUREHEAT heater. This hot air heater provides a maximum process heat of 1500 degrees F by providing two-stage 6,000 watts at 240 volt power and 20.8 max. amps. This TUTCO SUREHEAT heater is 10.88" long with a 1.25" outside diameter.

062543 TUTCO SUREHEAT Hot Air Heater Series III Hot Air Heater Element with Ceramic Tube

The 063007 (or F063007) TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar). This threaded inline hot air heater is designed for high pressure air applications needing a 2.5" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 18000 maximum watts at 240 volt Single or Three Phase power and 75 (1PH) or 44 (3PH) max. amps. The heater is 12.2" long with a 304 stainless steel housing..

The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.

068462 (also known as F068462) TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 1,500 max. watts, 120 max. volts, and 13 max. amps.
Login for special pricing

068463 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 2,000 max. watts, 240 max. volts, and 9 max. amps.
Login for special pricing

068464 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 3,500 max. watts, 240 max. volts, and 15 max. amps.
Login for special pricing

The TUTCO SUREHEAT Hot Air Tool Flare Attachment 068472 Can Be Used On TUTCO SUREHEAT Hot Air Tools. Customers Can Also Make Their Own Custom Nose Attachment To Direct The Air From The Hot Air Tool As Needed. The Flare Attachment For TUTCO SUREHEAT Hot Air Heaters Is 2.19" High With A 0.060" By 2.5" Flared Opening. A Clamp Is Also Included For Attaching To The End Of The Air Heater.
Login for special pricing

The 068535 (or F068535) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068535 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7000 watts of heating capacity with 240-volt 3-phase power.

The 068539 (or F0685359 TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068539 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7000 watts of heating capacity with 480-volt 3-phase power.

The 068541 (or F0685341) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068541 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 9000 watts of heating capacity with 480-volt 3-phase power.

The 068544 (or F068544) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068544 replacement heating element is 3.50" in diameter with a 304 stainless steel housing, and it is made to supply 12,000 watts of heating capacity with 240-volt 3-phase power.

The 068547 (or F068547) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068547 replacement heating element is 3.50" in diameter with a 304 stainless steel housing, and it is made to supply 12,000 watts of heating capacity with 480-volt 3-phase power.

The 068577 (or F068577) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068577 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 6000 watts of heating capacity with 380-volt 3-phase power.

The 068578 (or F068578) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068578 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 7500 watts of heating capacity with 380-volt 3-phase power.

The 068581 (or F068581) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F068581 replacement heating element is 3.50" in diameter with a 304 stainless steel housing, and it is made to supply 10,000 watts of heating capacity with 380-volt 3-phase power.

070429 Digital temperature control, 1/16 DIN, 4-20mA and used with 066823 closed-loop power control. This temperature controller has been obsoleted by TUTCO SUREHEAT, and the 076361 model will ship in its place. The 076361 is the digital controller used for TUTCO SUREHEAT hot air tools 068462, 068463 and 068464.

The TUTCO SUREHEAT Serpentine VI Hot Air Heater Triple Pass Exchange Housing (Baffled) 071341 (or F071341) is used for the Serpentine VI Hot Air Tools. This housing is used for these TUTCO SUREHEAT heater elements: 040291, 040292, 061429, 056548, 076634, and 076635. Similar to 003-10027 that is the housing for the 003-10031, 003-10032, 003-10072, and 003-10140 OEM heater elements.

072765 closed-loop power control unit is made for 60 amp, 480 volt 3 Phase and 4 to 20 mA temperature control output. This TUTCO SUREHEAT power control unit is used with the 074736 and 077085 TUTCO SUREHEAT Max and Max HT heaters.

The 072887 (or F072887) TUTCO SUREHEAT Serpentine Replacement Element (also known as SRE) was designed to replace European field-replaceable cartridge elements with an upgrade using Tutco SureHeat's Serpentine™ Technology. This Serpentine™ Technology provides high watt density by combining six individual Serpentine™  heating elements into each SRE assembly. The entire length of each element has the wire supported to reduce the normal damage caused by repetitive heating and cooling during the life of the element.

The F072887 replacement heating element is 2.75" in diameter with a 304 stainless steel housing, and it is made to supply 6000 watts of heating capacity with 440-volt 3-phase power.

The TUTCO SUREHEAT Serpentine VI Hot Air Heater Triple Pass Exchange Baffled Housing 074425 (or F074425) is used for the Serpentine VI Hot Air Tools. It is 2.1" in diameter with a 12.9" overall body length. The outside diameter of the air outlet is 1.4", and it has a 3/4" NPT on the air inlet opening. This housing is used for these TUTCO SUREHEAT heater elements: 040291, 040292, 061429, 056548, 076634, and 076635.

074439 TUTCO SUREHEAT threaded inline heater is a Style B design that can handle a maximum air pressure of 150 psi (10 bar). This TUTCO SUREHEAT air heater model allows a minimal air leak out through the power wires. This threaded inline hot air heater is designed for high pressure air applications needing a 2.5" NPT sized heater.