Similar To A0503483 Flanged Immersion Heaters Used For Oem Water Temperature Controllers. This Immersion Heater Is Designed For Heating Process Water And Has A Flange (6" Wide By 6" Wide By 3/8" Thick) For Mounting Onto The Water Thermolator. This Heater Runs With 480 Volts 3 Phase Power, And It Is A 9,000 Watt Heater. The Immersion Length Of The Heater Elements Is 15" Long. There Are Six Immersion Heater Elements That Are Each Made With A 321 Stainless Steel Sheath, Which Is Suitable For A Process Water Environment. Each Immersion Heater Comes With A Gasket Similar To A0015556 And Is 3" In Diameter. Also Compare This Heater To Tpn01580, 722-00137-01, And Tpn01834.

ASB2545 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER

ASB2545-5818 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER

The GSU-1003-208-CT urn heater is made for applications requiring 208 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The GSU-1003-CT urn heater is made for applications requiring 240 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The TTUH-CO-15 (pcn186079) made by Chromalox is made for applications requiring 120 volt power single phase, 1500 watts, and 12.5 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.

The TTUH-CO-15 (pcn256049 NS) made by Chromalox is made for applications requiring 208 volt power single phase and 1500 watts/7.2 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.

The GSU-1203-CT urn heater is made for applications requiring 240 volt power three phase and 12000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The GSU-152-120-CT similar urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.

The TTUH-CO-15 (pcn 256057 NS) made by Chromalox is made for applications requiring 240 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.

The GSU-202-120-CT urn heater is made for applications requiring 120 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.

The GSU-202-208-CT urn heater is made for applications requiring 208 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.

The GSU-202-CT SIMILAR urn heater is made for applications requiring 240 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.

The GSU-302-208-CT replacement urn heater is made for applications requiring 208-volt power single phase and 3000 watts. In the urn heater diagram that is attached below, the overall heater element length dimension is 6.75 inches (was 7.5 inches), the inside tank height is 2.125 inches (was 1.375 inches), and the heater element width is 3-1/16 inches (was 3 inches). This heater comes with two copper (was stainless steel) sheath tubular elements that are silver brazed into a brass header. This heater is also supplied with a standard 4-inch square or octagon conduit box.

This GSU-302-CT drop-in replacement urn heater is made for applications requiring 240-volt power single phase and 3000 watts, and it has a thermal cutout.

The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.

When the GSU-402-CT urn heater IS NO longer available, The TTUH-CO-40 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.

The GSU-403-208-CT urn heater is made for applications requiring 208 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.

The GSU-403-CT urn heater is made for applications requiring 240 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.

The GSU-502-208-CT similar urn heater is made for applications requiring 208 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The GSU-502-CT urn heater is made for applications requiring 240 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 12.75 inches, the "B" inside tank height is 1-5/16 inch, and the "C" width dimension is 4 inches.

The GSU-503-208-CT urn heater has been obsoleted and is an immersion heater built with a lower watt density to provide a long heater life and dependable performance.

The GSU-503-CT urn heater replacement option is the TTUH-CO-503. It is made for applications requiring 240 volt power three phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches.

The TTUH-CO-60 urn heater is made for applications requiring 208 volt power single phase and 6000 watts. In the urn heater diagram that is attached below, the "A" overall heater length dimension is 14.5" (was 13.5 inches), the "B" inside tank height is 2.125" (was 1 inch), and the "C" width dimension is 4" (was 4 inches).

The GSU-602-230-CT urn heater IS NOW OBSOLETED. TTUH-CO-60 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.

The GSU-602-CT SIMILAR urn heater is made for applications requiring 240 volt power single phase and 6000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 13.5 inches, the "B" inside tank height is 1 inch, and the "C" width dimension is 4 inches.

The GSU-603-208-CT urn heater is made for applications requiring 208 volt power three phase and 6000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The GSU-603-CT urn heater is made for applications requiring 240 volt power three phase and 6000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.

The 3064725-61889 replacement urn heater is made for applications requiring 208 or 240 volt power single phase and 5250 or 7000 watts. The replacement urn heater's overall heater length is 14.5 inches, the inside tank height is 2-11/16 inch, and the overall width dimension of the heater element is 5-3/8 inches. This heater comes with two copper sheath tubular elements. This bottom-mounted heater is also supplied with a standard 4 inch square conduit box. A thermal cut-off with a manual reset button is supplied with this immersion heater, and it will shut the power off to the heater when a low liquid level causes the heater element to overheat to 230 degrees F. The Glenn Electric immersion heater part number is GSU-702-208-CO OR 10-8345.

The GSU-702-CT urn heater is made for applications requiring 240 volt power single phase and 7000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 13.5 inches, the "B" inside tank height is 1 inch, and the "C" width dimension is 4 inches.