F039272 TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

039272-90 TUTCO SUREHEAT air heater 90 degree probe Type k thermocouple with an exposed tip for faster reaction time. The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.

072765 closed-loop power control unit is made for 60 amp, 480 volt 3 Phase and 4 to 20 mA temperature control output. This TUTCO SUREHEAT power control unit is used with the 074736 and 077085 TUTCO SUREHEAT Max and Max HT heaters.

075526 (F075526) Osram Sylvania SureHeat JET control panel is a closed-loop temperature control system for SureHeat® JET heaters with RS-232 communication. It comes with a NEMA 4X enclosure and a 50A 240V 1P electrical rating.

The 074829 (also know as F074829) is a 1/16 DIN digital temperature controller for the S2 type K thermocouple for the Tutco SureHeat Jet heaters 074718 and 074719. This controller goes with the 074835 inlet temperature limit (relay output) circuit for the S1 type K thermocouple also for the Tutco SureHeat Jet heaters.

076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.

F076753 Sureheat Max Control Panel is designed for 240 volt 3 phase power with 30 amps and 60Hz. It can be used for the F074724 and F074728 Sureheat Max Heaters.

F076754 Tutco SureHeat Max and Max HT Control Panel is designed for 480 volt 3 phase power with 30 amps and 60Hz. It can be used for the F074726, F074731, F074734, and F077083 Sureheat Heaters.

F076755 or 076755 Tutco Sureheat Max/Max HT Control Panel is designed for 240 volt 3 phase power with 60 amps and 60Hz. It can be used for the 074732 and 077081 TUTCO SUREHEAT Heaters.

F076756 or 076756 Sureheat Max/Max HT Control Panel is designed for 480 volt 3 phase power with 60 amps and 60Hz. It can be used for the 074736 and 077085 Sureheat Heaters.

F076905 or 076905 Tutco Sureheat Max Control Panel is designed for 380/400 volt 3 phase power with 30 amps and 50/60Hz. It can be used for the 074725, 074729, and 077082 TUTCO SUREHEAT Max/Max HT Heaters.

F076906 or 076906 Tutco Sureheat Max/Max HT Control Panel is designed for 380/400 volt 3 phase power with 60 amps and 50/60Hz. It can be used for the 074735 and 077084 Tutco Sureheat Heaters.

A1P-24-80 Avatar Triac Power Controller--has a 1 to 7 day lead time to build! This controller can be used for controlling Tutco SureHeat industrial electric hot air heaters.

The A1P-24-80 power controller features:

208-240VAC Single Phase 50/60 Hz
80 amps
Phase Angled Fired
Output Voltage can be 0 to 97% of input voltage
4 to 20 mA at 5 volts DC, 250 Ohms Input Control Signal

C1p-12-20 Avatar Power Controller