The 029485 (F029485) is a thermocouple holder for the TUTCO SUREHEAT Serpentine II hot air heaters.

TUTCO SUREHEAT Hot Air Heater Serpentine II housing assembly for TUTCO SUREHEAT hot air heater elements 029765, 029766, 029767, and 060418.

The 029765 TUTCO SUREHEAT air heater provides a maximum process heat of 1400 degrees F with 2,000 watts at 240 volt power and a maximum of 8 amps. This TUTCO SUREHEAT heater has an overall length of 8.20" long with a 0.63" outside diameter.

This 029766 Serpentine II hot air heater provides a maximum process heat of 1400 degrees F by providing 2,800 watts at 240 volt power and 12 max. amps. The heater is 8.20" long with a 0.63" outside diameter.

This 029767 TUTCO SUREHEAT hot air heater provides a maximum process heat of 1400 degrees F by providing 3,600 watts at 240 volt power and 15 max. amps. The heater is 8.20" long with a 0.63" outside diameter.

038821 TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required.

The 038822 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

The 038824 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

038825 TUTCO SUREHEAT threaded inline heater is a Style A design that should be used whenever an absolute leak-proof system up to 150 psi (10 bar) is required. This threaded inline hot air heater is designed for high pressure air applications needing a 1.25" NPT sized heater. This hot air heater provides a maximum process heat of 1400 degrees F by providing 6000 maximum watts at 220 volt power and 27.3 max. amps.

The 038826 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

F039272 TUTCO SUREHEAT air heater Type k thermocouple with an exposed tip for faster reaction time. Sold by TUTCO SUREHEAT . The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

039272-90 TUTCO SUREHEAT air heater 90 degree probe Type k thermocouple with an exposed tip for faster reaction time. The type k thermocouple has a 3/16" diameter probe with an exposed tip to quickly sense the exit air temperature. This thermocouple tip should be mounted 1" or less (0.5" is better) from the exit air opening.

039739 TUTCO SUREHEAT Hot air heater Serpentine II base adaptor assembly works with Serpentine II TUTCO SUREHEAT heater elements. The TUTCO SUREHEAT heater part numbers are 029765, 029766, 029767, & 060418.

The 040291 TUTCO SUREHEAT Hot Air tool provides a triple pass exchange housing.

The Serpentine VI heater's triple pass exchange housing uses incoming air to travel (and cool) down the outside shell of the heater.
The air then travels through a slot and into air holes, where it rapidly warms as it flows over the heater element and exits out of the heater.

The 040292 Hot Air Heater Provides A Maximum Process Heat Of 1500 Degrees F By Providing 6,000 Watts At 240 Volt Power And 25 Max. Amps. The Heater Is 10.88" Long With A 1.25" Outside Diameter.

The 040299 is a thermocouple holder for the TUTCO SUREHEAT Serpentine VI hot air heaters, and it includes one type K thermocouple with an exposed tip.

042339 TUTCO SUREHEAT Hot Air Heater Serpentine VI Base Adaptor Assembly Works With Serpentine VI TUTCO SUREHEAT Heater Elements. The TUTCO SUREHEAT Heater Part Numbers Are 040291, 040292, 061429, & 056548.

048917 TUTCO SUREHEAT Hot Air Tool Heater Is Serpentine II Heater With A Ceramic Tube. The Hot Air Heater Is 8.20" Long With A 0.63" Outside Diameter. The Heater Provides 3600 Watts Of Heat Using 240 Volt Single Phase Power.

The 056548 Hot Air Heater Provides A Maximum Process Heat Of 1500 Degrees F By Providing 8,000 Watts At 240 Volt Power And 33.3 Max. Amps. The Heater Is 10.88" Long With A 1.25" Outside Diameter.

057081 TUTCO SUREHEAT Air Heater Open Loop Manual Power Controls Are Made For 100-277 Volt Power Single Phase And 25 Amps.

TUTCO SUREHEAT Serpentine VI Hot Air Heater Triple Pass Exchange Housing 057088 is used for the Serpentine VI Hot Air Tools. It is 2.1" in diameter with a 12.9" overall body length. The outside diameter of the air outlet is 1.4", and it has a 3/4" NPT on the air inlet opening.

The 060418 hot air heater provides a maximum process heat of 1500 degrees F by providing two-stage 3,600 watts at 240 volt power and 15 max. amps. This TUTCO SUREHEAT heater is 8.63" long with a 0.63" outside diameter.

The housing for this heater is part number 029763.

This 061429 TUTCO SUREHEAT Hot Air Heater Provides A Maximum Process Heat Of 1500 Degrees F By Providing Two-stage 6,000 Watts At 240 Volt Power And 20.8 Max. Amps. This TUTCO SUREHEAT Heater Is 10.88" Long With A 1.25" Outside Diameter.

The 063007 TUTCO SUREHEAT threaded inline heater is a Style B design which will have slight air leakage through the power wire strands, and it can handle up to 150 psi (10 bar).

066823 closed-loop power control unit is made for 30 amp, 240 volt and 4 to 20 mA. Overall dimensions are 5.5? long 4.75? wide and 3? height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers.

068462 (also known as F068462) TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 1,500 max. watts, 120 max. volts, and 13 max. amps.

068463 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 2,000 max. watts, 240 max. volts, and 9 max. amps.

068464 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 3,500 max. watts, 240 max. volts, and 15 max. amps.

The TUTCO SUREHEAT Hot Air Tool Flare Attachment 068472 Can Be Used On TUTCO SUREHEAT Hot Air Tools. Customers Can Also Make Their Own Custom Nose Attachment To Direct The Air From The Hot Air Tool As Needed. The Flare Attachment For TUTCO SUREHEAT Hot Air Heaters Is 2.19" High With A 0.060" By 2.5" Flared Opening. A Clamp Is Also Included For Attaching To The End Of The Air Heater.

070429 Digital temperature control, 1/16 DIN, 4-20mA and used with 066823 closed-loop power control. This temperature controller has been obsoleted by TUTCO SUREHEAT, and the 076361 model will ship in its place. The 076361 is the digital controller used for TUTCO SUREHEAT hot air tools 068462, 068463 and 068464.