057081 TUTCO SUREHEAT Air Heater Open Loop Manual Power Controls Are Made For 100-277 Volt Power Single Phase And 25 Amps.

The 066823 (also known as F066823) closed-loop power control unit is made for 30 amp, 120/240 volt and 4 to 20mA output (phase-angle fired SCR--silicon controlled rectifier--power control). Overall dimensions are 5.5 inches long 4.75 inches wide and 3 inch height. This TUTCO SUREHEAT power control unit is used with the 070429 (now obsoleted) and 076361 digital temperature controllers. The 066823 is the closed-loop power control used for TUTCO SUREHEAT hot air heaters. The unit has a large aluminum heat sink for cooling, a NEMA 4X (IP65) front panel and it has UL, CSA and CE safety approvals.

068462 (also known as F068462) TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 1,500 max. watts, 120 max. volts, and 13 max. amps.

068463 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 2,000 max. watts, 240 max. volts, and 9 max. amps.

068464 TUTCO SUREHEAT Hot Air tool has a built-in type K thermocouple. This process heater has a slotted end for applying a flared attachment, (part no. 068472). A 1/4" hot air hose barb connection is provided on this process heater element. These hot air heaters provide a maximum process heat of 1400 degrees Fahrenheit, 3,500 max. watts, 240 max. volts, and 15 max. amps.

The TUTCO SUREHEAT Hot Air Tool Flare Attachment 068472 Can Be Used On TUTCO SUREHEAT Hot Air Tools. Customers Can Also Make Their Own Custom Nose Attachment To Direct The Air From The Hot Air Tool As Needed. The Flare Attachment For TUTCO SUREHEAT Hot Air Heaters Is 2.19" High With A 0.060" By 2.5" Flared Opening. A Clamp Is Also Included For Attaching To The End Of The Air Heater.

070429 Digital temperature control, 1/16 DIN, 4-20mA and used with 066823 closed-loop power control. This temperature controller has been obsoleted by TUTCO SUREHEAT, and the 076361 model will ship in its place. The 076361 is the digital controller used for TUTCO SUREHEAT hot air tools 068462, 068463 and 068464.

076361 Digital temperature controller, 1/16 DIN, 4-20mA is a direct replacement for the 070429 obsoleted temperature controller and is used with 066823 closed-loop power control. The 076361 is the digital controller used for many of the TUTCO SUREHEAT hot air process heaters.

C1p-12-20 Avatar Power Controller