Similar To A0503483 Flanged Immersion Heaters Used For Oem Water Temperature Controllers. This Immersion Heater Is Designed For Heating Process Water And Has A Flange (6" Wide By 6" Wide By 3/8" Thick) For Mounting Onto The Water Thermolator. This Heater Runs With 480 Volts 3 Phase Power, And It Is A 9,000 Watt Heater. The Immersion Length Of The Heater Elements Is 15" Long. There Are Six Immersion Heater Elements That Are Each Made With A 321 Stainless Steel Sheath, Which Is Suitable For A Process Water Environment. Each Immersion Heater Comes With A Gasket Similar To A0015556 And Is 3" In Diameter. Also Compare This Heater To Tpn01580, 722-00137-01, And Tpn01834.

Tpn01174 Square Flanged Immersion Heater Has A 12.44" Immersion Length. The Incoloy 800 Sheath Is .475" In Diameter With Three Elements, And Makes This Immersion Heater Good For These Typical Applications: Hot Air Dryers, Dehumidifying Dryers, Heat Exchange Systems, Water, Water Solutions, Steam Tables, And Air Heating.

Tpn01201 Flanged Immersion Heater Used For Oem Water Temperature Controllers. This Immersion Heater Is Designed For Heating Process Water And Has A Flange (3.5" Wide By 3.5" Wide By 1/4" Thick) For Mounting To The Water Thermolator. This Heater Runs With 480 Volts 3 Phase Power, And It Is A 3,500 Watt Heater. The Immersion Length Of The Heater Elements Is 17.88" Long. There Are Three Immersion Heater Elements That Are Each Made With An Incoloy 800 Sheath. Each Immersion Heater Comes With A Fiber Gasket (Compare To W00012917 Gasket) And Is 3" In Diameter. Other Similar Flanged Immersion Heater Part Numbers For Comparison Would Be W00015855 Or Tpn01333.

Similar To Tpn01580 And A0503483 Flanged Immersion Heaters Used For Oem Air Applications. This Flanged Immersion Heater Is Usually Designed For Heating Air With A Flange (6" Wide By 6" Wide By 3/8" Thick) For Mounting Onto The Water Thermolator. This Heater Runs With 480 Volts 3 Phase Power, And It Is A 9,000 Watt Heater. The Immersion Length Of The Heater Elements Is 15" Long. There Are Six Immersion Heater Elements That Are Each Made With An Incoloy 840 Stainless Steel Sheath, Which Is Suitable For A Process Water Environment. Each Immersion Heater Comes With A Gasket Similar To A0015556 And Is 3" In Diameter. Also Compare This Heater To 2073012, A0503483, 722-00137-01, Tpn01157 (Dual Voltage) And Tpn01834 Immersion Heaters.

Tubular Heater Similar To Oem Hot Runner Manifold Heater Tu13550 (55-1446n1). These Tubular Heater Elements Are Made For 230 Volt Power To Provide 672 Watts Of Heating Capacity To Your Hot Runner Manifold. The Heater Elements Have Metric Termination Threads--m2.5 By 4.5. This Tubular Heater Element Is Available For Same Day Shipments.