Chromalox_Immersion_Heaters-flangedIMMERSION HEATERS: An Overview

Immersion heaters consist of tubular heating elements that are often in the form of a “U” or circular shape. Users can choose from several different immersion heater configurations and styles by selecting from an array of heating capacities (kilowatt ratings), voltages, sheath materials, terminal housings, thermostat types and extras.

The immersion heater elements are attached to a wiring box by using joining methods such as welding or brazing. The wiring box of such a heater typically is separated from the immersion solution via gaskets, bolt-on flanges, screw plug fittings, or an extension that allows the conduit box to hang over the side of the tank away from the immersion liquid.

along with being highly efficient, immersion heaters are available in a variety of sizes and shapes, which makes them  ideal for a wide variety of industrial or commercial applications. For instance, they are a good choice for the food and beverage sector to heat liquids such as water, oil, pulp or milk. Immersion heaters are also useful for freeze protection applications, and many different heat transfer systems make use of an immersion heater.

When ordering an immersion heater, there is an array of heater types, heating capacities (kilowatt ratings), voltages, sheath materials, terminal housings, thermostats and thermal cut-outs to choose from.

There are several standard products available to purchase from JobcoSupply.com; however, most manufacturers also offer a number of custom alternatives for the customer’s unique application. With expert engineering capabilities, immersion heaters can be made for use in corrosive or explosive environments and pressurized heating systems.

See more about... Urn Heaters Chromalox Immersion Heaters Tubular and Process Heaters Watlow Immersion Heaters

Shop Immersion Heaters

Shop Urn Heaters

Urn Immersion Heaters for Buffet Tables, Steam Tables, and Catering Tables.  These Marathon/Glenn Electric similar and Chromalox buffet table heaters are supplied with a thermal cutout that is designed to de-energize the heater when the liquid is gone.  If the heater elements are PARTIALLY IMMERSED in water, then this will overwork the heater causing it to burn out faster than normal.  The thermal cutout is a safety precaution feature and should NOT be continuously used as your “low liquid” detector to alert you to the need for adding water.  Your steam table needs a regular maintenance schedule that keeps the heater elements TOTALLY IMMERSED IN WATER and keeps the heater elements free of corrosion build-up by using copper wool to clean them.  Click here if you only need a straight steam table heater.

Call Jobco at 479-424-1300 to order your replacement steam table heater!!!

Click here for important information about operating and maintaining an urn immersion heater.


View 15 30 60 Showing 1-30 of 46 Results
View Cart Product successfully added to your cart.
  • ASB2545 1/2

    ASB2545 1/2"-20 Threaded 41" Long Immersion Heater-Copper Sheath

    $100.00
    ASB2545 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    ASB2545 1/2

    ASB2545 1/2"-20 Threaded 41" Long Immersion Heater-Copper Sheath

    ASB2545 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER
    $100.00

    ASB2545 1/2"-20 Threaded 41" Long Immersion Heater-Copper Sheath

    $100.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • ASB2545 5/8

    ASB2545 5/8"-18 Threaded 41" Long Immersion Heater-Copper Sheath

    $100.00
    ASB2545-5818 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    ASB2545 5/8

    ASB2545 5/8"-18 Threaded 41" Long Immersion Heater-Copper Sheath

    ASB2545-5818 0.315"OD 41" OVERALL LENGTH SHEATH SOFT ANNEALED Cu (FOR CUSTOMER BENDING) STRAIGHT TUBULAR HEATER
    $100.00

    ASB2545 5/8"-18 Threaded 41" Long Immersion Heater-Copper Sheath

    $100.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU Urn Heater Thermal Cutout 37T1062-01

    GSU Urn Heater Thermal Cutout 37T1062-01

    $999.00
    37T1062-01 thermodisc 10H14 snap action t-stat
    1-1/2 2-4 212586 L285F THERM-O-DISC A1235. THIS PART IS NO LONGER AVAILABLE. CONTACT JOBCO 479-424-1300 FOR AVAILABLE OPTIONS.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU Urn Heater Thermal Cutout 37T1062-01

    GSU Urn Heater Thermal Cutout 37T1062-01

    37T1062-01 thermodisc 10H14 snap action t-stat
    1-1/2 2-4 212586 L285F THERM-O-DISC A1235. THIS PART IS NO LONGER AVAILABLE. CONTACT JOBCO 479-424-1300 FOR AVAILABLE OPTIONS.
    $999.00

    GSU Urn Heater Thermal Cutout 37T1062-01

    $999.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-1003-208-CT Urn Heater Immersion Heater

    GSU-1003-208-CT Urn Heater Immersion Heater

    $455.00
    The GSU-1003-208-CT urn heater is made for applications requiring 208 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-1003-208-CT Urn Heater Immersion Heater

    GSU-1003-208-CT Urn Heater Immersion Heater

    The GSU-1003-208-CT urn heater is made for applications requiring 208 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    $455.00

    GSU-1003-208-CT Urn Heater Immersion Heater

    $455.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-1003-CT Urn Heater Immersion Heater

    GSU-1003-CT Urn Heater Immersion Heater

    $455.00
    The GSU-1003-CT urn heater is made for applications requiring 240 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-1003-CT Urn Heater Immersion Heater

    GSU-1003-CT Urn Heater Immersion Heater

    The GSU-1003-CT urn heater is made for applications requiring 240 volt power three phase and 10000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    $455.00

    GSU-1003-CT Urn Heater Immersion Heater

    $455.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-102-120-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-102-120-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $485.00
    The TTUH-CO-15 (pcn186079) made by Chromalox is made for applications requiring 120 volt power single phase, 1500 watts, and 12.5 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-102-120-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-102-120-CT (TTUH-CO-15) Urn Heater Immersion Heater

    The TTUH-CO-15 (pcn186079) made by Chromalox is made for applications requiring 120 volt power single phase, 1500 watts, and 12.5 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    $485.00

    GSU-102-120-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $485.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-102-208-CT or GSU-152-208-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-102-208-CT or GSU-152-208-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $515.00
    The TTUH-CO-15 (pcn256049 NS) made by Chromalox is made for applications requiring 208 volt power single phase and 1500 watts/7.2 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-102-208-CT or GSU-152-208-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-102-208-CT or GSU-152-208-CT (TTUH-CO-15) Urn Heater Immersion Heater

    The TTUH-CO-15 (pcn256049 NS) made by Chromalox is made for applications requiring 208 volt power single phase and 1500 watts/7.2 amps. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    $515.00

    GSU-102-208-CT or GSU-152-208-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $515.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-1203-CT Urn Heater Immersion Heater

    GSU-1203-CT Urn Heater Immersion Heater

    $455.00
    The GSU-1203-CT urn heater is made for applications requiring 240 volt power three phase and 12000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-1203-CT Urn Heater Immersion Heater

    GSU-1203-CT Urn Heater Immersion Heater

    The GSU-1203-CT urn heater is made for applications requiring 240 volt power three phase and 12000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 16.5 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    $455.00

    GSU-1203-CT Urn Heater Immersion Heater

    $455.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-152-120-CT similar Urn Heater Immersion Heater

    GSU-152-120-CT similar Urn Heater Immersion Heater

    $540.00
    The GSU-152-120-CT similar urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-152-120-CT similar Urn Heater Immersion Heater

    GSU-152-120-CT similar Urn Heater Immersion Heater

    The GSU-152-120-CT similar urn heater is made for applications requiring 125 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $540.00

    GSU-152-120-CT similar Urn Heater Immersion Heater

    $540.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-152-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-152-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $515.00
    The TTUH-CO-15 (pcn 256057 NS) made by Chromalox is made for applications requiring 240 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-152-CT (TTUH-CO-15) Urn Heater Immersion Heater

    GSU-152-CT (TTUH-CO-15) Urn Heater Immersion Heater

    The TTUH-CO-15 (pcn 256057 NS) made by Chromalox is made for applications requiring 240 volt power single phase and 1500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7-7/16 inches, the "B" height is 4-13/16 inch, the "C" width dimension is 3-1/16 inches and the "D" dimension is 2-1/8 inches.
    $515.00

    GSU-152-CT (TTUH-CO-15) Urn Heater Immersion Heater

    $515.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-202-120-CT Urn Heater Immersion Heater

    GSU-202-120-CT Urn Heater Immersion Heater

    $440.00
    The GSU-202-120-CT urn heater is made for applications requiring 120 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-202-120-CT Urn Heater Immersion Heater

    GSU-202-120-CT Urn Heater Immersion Heater

    The GSU-202-120-CT urn heater is made for applications requiring 120 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $440.00

    GSU-202-120-CT Urn Heater Immersion Heater

    $440.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-202-208-CT Urn Heater Immersion Heater

    GSU-202-208-CT Urn Heater Immersion Heater

    $360.00
    The GSU-202-208-CT urn heater is made for applications requiring 208 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-202-208-CT Urn Heater Immersion Heater

    GSU-202-208-CT Urn Heater Immersion Heater

    The GSU-202-208-CT urn heater is made for applications requiring 208 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $360.00

    GSU-202-208-CT Urn Heater Immersion Heater

    $360.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-202-CT Urn Heater Immersion Heater

    GSU-202-CT Urn Heater Immersion Heater

    $450.00
    The GSU-202-CT SIMILAR urn heater is made for applications requiring 240 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-202-CT Urn Heater Immersion Heater

    GSU-202-CT Urn Heater Immersion Heater

    The GSU-202-CT SIMILAR urn heater is made for applications requiring 240 volt power single phase and 2000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $450.00

    GSU-202-CT Urn Heater Immersion Heater

    $450.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-252-208-CT Urn Heater Immersion Heater

    GSU-252-208-CT Urn Heater Immersion Heater

    $360.00
    The GSU-252-208-CT urn heater is made for applications requiring 208 volt power single phase and 2500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-252-208-CT Urn Heater Immersion Heater

    GSU-252-208-CT Urn Heater Immersion Heater

    The GSU-252-208-CT urn heater is made for applications requiring 208 volt power single phase and 2500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $360.00

    GSU-252-208-CT Urn Heater Immersion Heater

    $360.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-252-CT Urn Heater Immersion Heater

    GSU-252-CT Urn Heater Immersion Heater

    $360.00
    The GSU-252-CT urn heater is made for applications requiring 240 volt power single phase and 2500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-252-CT Urn Heater Immersion Heater

    GSU-252-CT Urn Heater Immersion Heater

    The GSU-252-CT urn heater is made for applications requiring 240 volt power single phase and 2500 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.375 inch, and the "C" width dimension is 3 inches.
    $360.00

    GSU-252-CT Urn Heater Immersion Heater

    $360.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-302-208-CT Similar Urn Heater Immersion Heater  208 volt 3000 watts

    GSU-302-208-CT Similar Urn Heater Immersion Heater 208 volt 3000 watts

    $516.00
    When the GSU-302-208-CT urn heater IS NO longer available, The TTUH-CO-30 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-302-208-CT Similar Urn Heater Immersion Heater  208 volt 3000 watts

    GSU-302-208-CT Similar Urn Heater Immersion Heater 208 volt 3000 watts

    When the GSU-302-208-CT urn heater IS NO longer available, The TTUH-CO-30 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    $516.00

    GSU-302-208-CT Similar Urn Heater Immersion Heater 208 volt 3000 watts

    $516.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-302-CT Similar Urn Heater Immersion Heater  240 volt 3000 watts

    GSU-302-CT Similar Urn Heater Immersion Heater 240 volt 3000 watts

    $516.00
    When the GSU-302-CT urn heater IS NO longer available, The TTUH-CO-30 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-302-CT Similar Urn Heater Immersion Heater  240 volt 3000 watts

    GSU-302-CT Similar Urn Heater Immersion Heater 240 volt 3000 watts

    When the GSU-302-CT urn heater IS NO longer available, The TTUH-CO-30 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    $516.00

    GSU-302-CT Similar Urn Heater Immersion Heater 240 volt 3000 watts

    $516.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-303-208-CT Urn Heater Immersion Heater

    GSU-303-208-CT Urn Heater Immersion Heater

    $299.00
    The GSU-303-208-CT urn heater is made for applications requiring 208 volt power three phase and 3000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-303-208-CT Urn Heater Immersion Heater

    GSU-303-208-CT Urn Heater Immersion Heater

    The GSU-303-208-CT urn heater is made for applications requiring 208 volt power three phase and 3000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    $299.00

    GSU-303-208-CT Urn Heater Immersion Heater

    $299.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-303-CT Urn Heater Immersion Heater

    GSU-303-CT Urn Heater Immersion Heater

    $299.00
    The GSU-303-CT urn heater is made for applications requiring 240 volt power three phase and 3000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-303-CT Urn Heater Immersion Heater

    GSU-303-CT Urn Heater Immersion Heater

    The GSU-303-CT urn heater is made for applications requiring 240 volt power three phase and 3000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    $299.00

    GSU-303-CT Urn Heater Immersion Heater

    $299.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    $640.00

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    $640.00

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    The GSU-402-208-CT urn heater is obsolete, but another heater is available. It is made for applications requiring 208 volt power single phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 9.5 inches, the "D" inside tank height is 2.125 inch, and the "C" width dimension is 3-1/16 inches.
    $640.00

    GSU-402-208-CT SIMILAR Urn Heater Immersion Heater

    $640.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-402-CT Similar Urn Heater Immersion Heater  240 volt 4000 watts

    GSU-402-CT Similar Urn Heater Immersion Heater 240 volt 4000 watts

    $540.00
    When the GSU-402-CT urn heater IS NO longer available, The TTUH-CO-40 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-402-CT Similar Urn Heater Immersion Heater  240 volt 4000 watts

    GSU-402-CT Similar Urn Heater Immersion Heater 240 volt 4000 watts

    When the GSU-402-CT urn heater IS NO longer available, The TTUH-CO-40 is a COMPARABLE immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    $540.00

    GSU-402-CT Similar Urn Heater Immersion Heater 240 volt 4000 watts

    $540.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-403-208-CT Urn Heater Immersion Heater

    GSU-403-208-CT Urn Heater Immersion Heater

    $375.00
    The GSU-403-208-CT urn heater is made for applications requiring 208 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-403-208-CT Urn Heater Immersion Heater

    GSU-403-208-CT Urn Heater Immersion Heater

    The GSU-403-208-CT urn heater is made for applications requiring 208 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    $375.00

    GSU-403-208-CT Urn Heater Immersion Heater

    $375.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-403-CT Urn Heater Immersion Heater

    GSU-403-CT Urn Heater Immersion Heater

    $375.00
    The GSU-403-CT urn heater is made for applications requiring 240 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-403-CT Urn Heater Immersion Heater

    GSU-403-CT Urn Heater Immersion Heater

    The GSU-403-CT urn heater is made for applications requiring 240 volt power three phase and 4000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 7.5 inches, the "B" inside tank height is 1.875 inch, and the "C" width dimension is 3 inches.
    $375.00

    GSU-403-CT Urn Heater Immersion Heater

    $375.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-502-208-CT Similar Urn Heater Immersion Heater

    GSU-502-208-CT Similar Urn Heater Immersion Heater

    $595.00$482.00
    The GSU-502-208-CT similar urn heater is made for applications requiring 208 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    Jobco
    GSU-502-208-CT Similar Urn Heater Immersion Heater

    GSU-502-208-CT Similar Urn Heater Immersion Heater

    The GSU-502-208-CT similar urn heater is made for applications requiring 208 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches, the "B" inside tank height is 2.25 inch, and the "C" width dimension is 4 inches.
    $595.00 $482.00

    GSU-502-208-CT Similar Urn Heater Immersion Heater

    $595.00 $482.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-502-CT Similar Urn Heater Immersion Heater

    GSU-502-CT Similar Urn Heater Immersion Heater

    $553.00
    The GSU-502-CT urn heater is made for applications requiring 240 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 12.75 inches, the "B" inside tank height is 1-5/16 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-502-CT Similar Urn Heater Immersion Heater

    GSU-502-CT Similar Urn Heater Immersion Heater

    The GSU-502-CT urn heater is made for applications requiring 240 volt power single phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 12.75 inches, the "B" inside tank height is 1-5/16 inch, and the "C" width dimension is 4 inches.
    $553.00

    GSU-502-CT Similar Urn Heater Immersion Heater

    $553.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-503-208-CT Urn Heater Immersion Heater Similar

    GSU-503-208-CT Urn Heater Immersion Heater Similar

    $470.00
    The GSU-503-208-CT urn heater has been obsoleted and is an immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-503-208-CT Urn Heater Immersion Heater Similar

    GSU-503-208-CT Urn Heater Immersion Heater Similar

    The GSU-503-208-CT urn heater has been obsoleted and is an immersion heater built with a lower watt density to provide a long heater life and dependable performance.
    $470.00

    GSU-503-208-CT Urn Heater Immersion Heater Similar

    $470.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-503-CT  Urn Heater Immersion Heater-similar

    GSU-503-CT Urn Heater Immersion Heater-similar

    $611.00

    The GSU-503-CT urn heater replacement option is the TTUH-CO-503. It is made for applications requiring 240 volt power three phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-503-CT  Urn Heater Immersion Heater-similar

    GSU-503-CT Urn Heater Immersion Heater-similar


    The GSU-503-CT urn heater replacement option is the TTUH-CO-503. It is made for applications requiring 240 volt power three phase and 5000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 11 inches.
    $611.00

    GSU-503-CT Urn Heater Immersion Heater-similar

    $611.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • GSU-602-208-CT Urn Heater Immersion Heater

    GSU-602-208-CT Urn Heater Immersion Heater

    $375.00
    The GSU-602-208-CT urn heater is made for applications requiring 208 volt power single phase and 6000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 13.5 inches, the "B" inside tank height is 1 inch, and the "C" width dimension is 4 inches.
    Maximum quantity exceeded
    Minimum purchase amount of 0 items is Required
    GSU-602-208-CT Urn Heater Immersion Heater

    GSU-602-208-CT Urn Heater Immersion Heater

    The GSU-602-208-CT urn heater is made for applications requiring 208 volt power single phase and 6000 watts. In the urn heater diagram that is shown below, the "A" overall heater length dimension is 13.5 inches, the "B" inside tank height is 1 inch, and the "C" width dimension is 4 inches.
    $375.00

    GSU-602-208-CT Urn Heater Immersion Heater

    $375.00
    Successfully Added to your Shopping Cart
    Adding to Cart...
1
2

Have a question? Don’t see what you’re looking for? Call us at (479) 424-1300 or send us a message!