The TD75080E-38S-240 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 350 watts with 38 inch fiberglass leads.

The TD75080F-14A12 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with right-angle 12 inch stainless steel braiding on 14 inch leads.

The TD75080F-14B12 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 12 inch stainless steel braiding on 14 inch leads.

The TD75080F-14C12 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 12 inch flexible conduit on 14 inch leads.

The TD75080F-14E cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 14 inch fiberglass leads and EXPOXY POTTING.

The TD75080F-14F cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 14 inch fiberglass leads and a standard 1.5 inch flange.

The TD75080F-14H cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Brass NPT fitting and 14 inch fiberglass leads.

The TD75080F-14K12 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 12 inch right-angle flexible conduit on 14 inch leads.

The TD75080F-14Q cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Stainless Steel NPT fitting and 14 inch fiberglass leads.

The TD75080F-14R cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 14 inch right-angle fiberglass leads.

The TD75080F-14S cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 14 inch fiberglass leads.

The TD75080F-26A24 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with right-angle 24 inch stainless steel braiding on 26 inch leads.

The TD75080F-26B24 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 24 inch stainless steel braiding on 26 inch leads.

The TD75080F-26C24 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 24 inch flexible conduit on 26 inch leads.

The TD75080F-26E cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 26 inch fiberglass leads and EXPOXY POTTING.

The TD75080F-26F cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 26 inch fiberglass leads and a standard 1.5 inch flange.

The TD75080F-26H cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Brass NPT fitting and 26 inch fiberglass leads.

The TD75080F-26K24 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 24 inch right-angle flexible conduit on 26 inch leads.

The TD75080F-26Q cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Stainless Steel NPT fitting and 26 inch fiberglass leads.

The TD75080F-26R cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 26 inch right-angle fiberglass leads.

The TD75080F-26S cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 26 inch fiberglass leads.

The TD75080F-38A36 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with right-angle 36 inch stainless steel braiding on 38 inch leads.

The TD75080F-38B36 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 36 inch stainless steel braiding on 38 inch leads.

The TD75080F-38C36 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 36 inch flexible conduit on 38 inch leads.

The TD75080F-38E cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 38 inch fiberglass leads and EXPOXY POTTING.

The TD75080F-38F cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 38 inch fiberglass leads and a standard 1.5 inch flange.

The TD75080F-38H cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Brass NPT fitting and 38 inch fiberglass leads.

The TD75080F-38K36 cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 36 inch right-angle flexible conduit on 38 inch leads.

The TD75080F-38Q cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with Stainless Steel NPT fitting and 38 inch fiberglass leads.

The TD75080F-38R cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 38 inch right-angle fiberglass leads.

The TD75080F-38S cartridge heater is 0.75" in diameter, with an insertion length of 8 inches and an overall length (OAL) of 8 inches. The cartridge heater is designed for 240 volts and 750 watts with 38 inch fiberglass leads.

The TD75090A-14A12 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with right-angle 12 inch stainless steel braiding on 14 inch leads.

The TD75090A-14B12 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 12 inch stainless steel braiding on 14 inch leads.

The TD75090A-14C12 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 12 inch flexible conduit on 14 inch leads.

The TD75090A-14E cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 14 inch fiberglass leads and EXPOXY POTTING.

The TD75090A-14F cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 14 inch fiberglass leads and a standard 1.5 inch flange.

The TD75090A-14H cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Brass NPT fitting and 14 inch fiberglass leads.

The TD75090A-14K12 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 12 inch right-angle flexible conduit on 14 inch leads.

The TD75090A-14Q cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Stainless Steel NPT fitting and 14 inch fiberglass leads.

The TD75090A-14R cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 14 inch right-angle fiberglass leads.

The TD75090A-14S cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 14 inch fiberglass leads.

The TD75090A-26A24 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with right-angle 24 inch stainless steel braiding on 26 inch leads.

The TD75090A-26B24 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 24 inch stainless steel braiding on 26 inch leads.

The TD75090A-26C24 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 24 inch flexible conduit on 26 inch leads.

The TD75090A-26E cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 26 inch fiberglass leads and EXPOXY POTTING.

The TD75090A-26F cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 26 inch fiberglass leads and a standard 1.5 inch flange.

The TD75090A-26H cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Brass NPT fitting and 26 inch fiberglass leads.

The TD75090A-26K24 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 24 inch right-angle flexible conduit on 26 inch leads.

The TD75090A-26Q cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Stainless Steel NPT fitting and 26 inch fiberglass leads.

The TD75090A-26R cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 26 inch right-angle fiberglass leads.

The TD75090A-26S cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 26 inch fiberglass leads.

The TD75090A-38A36 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with right-angle 36 inch stainless steel braiding on 38 inch leads.

The TD75090A-38B36 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 36 inch stainless steel braiding on 38 inch leads.

The TD75090A-38C36 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 36 inch flexible conduit on 38 inch leads.

The TD75090A-38E cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 38 inch fiberglass leads and EXPOXY POTTING.

The TD75090A-38F cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 38 inch fiberglass leads and a standard 1.5 inch flange.

The TD75090A-38H cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Brass NPT fitting and 38 inch fiberglass leads.

The TD75090A-38K36 cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 36 inch right-angle flexible conduit on 38 inch leads.

The TD75090A-38Q cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with Stainless Steel NPT fitting and 38 inch fiberglass leads.

The TD75090A-38R cartridge heater is 0.75" in diameter, with an insertion length of 9 inches and an overall length (OAL) of 9 inches. The cartridge heater is designed for 240 volts and 1800 watts with 38 inch right-angle fiberglass leads.