The TD75040B-38S cartridge heater is 0.75" in diameter, with an insertion length of 4 inches and an overall length (OAL) of 4 inches. The cartridge heater is designed for 240 volts and 1000 watts with 38 inch fiberglass leads.

The TD75050A-14A12 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with right-angle 12 inch stainless steel braiding on 14 inch leads.

The TD75050A-14B12 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 12 inch stainless steel braiding on 14 inch leads.

The TD75050A-14C12 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 12 inch flexible conduit on 14 inch leads.

The TD75050A-14E cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 14 inch fiberglass leads and EXPOXY POTTING.

The TD75050A-14F cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 14 inch fiberglass leads and a standard 1.5 inch flange.

The TD75050A-14H cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Brass NPT fitting and 14 inch fiberglass leads.

The TD75050A-14K12 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 12 inch right-angle flexible conduit on 14 inch leads.

The TD75050A-14Q cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Stainless Steel NPT fitting and 14 inch fiberglass leads.

The TD75050A-14R cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 14 inch right-angle fiberglass leads.

The TD75050A-14S cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 14 inch fiberglass leads.

The TD75050A-26A24 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with right-angle 24 inch stainless steel braiding on 26 inch leads.

The TD75050A-26B24 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 24 inch stainless steel braiding on 26 inch leads.

The TD75050A-26C24 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 24 inch flexible conduit on 26 inch leads.

The TD75050A-26E cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 26 inch fiberglass leads and EXPOXY POTTING.

The TD75050A-26F cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 26 inch fiberglass leads and a standard 1.5 inch flange.

The TD75050A-26H cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Brass NPT fitting and 26 inch fiberglass leads.

The TD75050A-26K24 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 24 inch right-angle flexible conduit on 26 inch leads.

The TD75050A-26Q cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Stainless Steel NPT fitting and 26 inch fiberglass leads.

The TD75050A-26R cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 26 inch right-angle fiberglass leads.

The TD75050A-26S cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 26 inch fiberglass leads.

The TD75050A-38A36 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with right-angle 36 inch stainless steel braiding on 38 inch leads.

The TD75050A-38B36 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 36 inch stainless steel braiding on 38 inch leads.

The TD75050A-38C36 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 36 inch flexible conduit on 38 inch leads.

The TD75050A-38E cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 38 inch fiberglass leads and EXPOXY POTTING.

The TD75050A-38F cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 38 inch fiberglass leads and a standard 1.5 inch flange.

The TD75050A-38H cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Brass NPT fitting and 38 inch fiberglass leads.

The TD75050A-38K36 cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 36 inch right-angle flexible conduit on 38 inch leads.

The TD75050A-38Q cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with Stainless Steel NPT fitting and 38 inch fiberglass leads.

The TD75050A-38R cartridge heater is 0.75" in diameter, with an insertion length of 5 inches and an overall length (OAL) of 5 inches. The cartridge heater is designed for 240 volts and 500 watts with 38 inch right-angle fiberglass leads.